Assembly_Test_Report

Assembly Test Report

An Assembly Test Report is a report that provides the results and details of tests performed on backflow prevention assemblies. It typically includes information such as the assembly location, assembly type, test dates, tester information, test readings, and whether the assembly passed or failed inspection.

You would use this report to review testing history, document compliance with regulatory requirements, provide records for audits, and maintain accurate service and inspection records for each assembly.


Do this...

1. Open Caselle Connect Backflow Management > Reports > Assembly Test Report.

2. Select a report title from the Title field. Press Enter.

3. Do you want to use the current month as the report date range?

  • Yes, I want to use the current month. Continue to the next step.

  • No, I want to use a different date range. Change the Report Date, or click Advanced Options.  


4. Which test results do you want to include on the report?

You can control which test results are available in the options for Assemblies > Enter Assembly Test Results.

  • I want to select a tests for a single test result. Click on the test result name.

  • I want to select tests for multiple tests results. Press and hold CTRL while you click on the test names.

  • I want to select a range of test results. Press and hold Shift, and then click on the first item followed by the last item.  


5. Which testing sections do you want to include on the report?

A testing section refers to the tests that are preformed when an assembly is initially tested, when an assembly receives maintenance, and when an assembly is tested again after maintenance is performed (final).

  • I want to include a testing section. Select the checkbox. You can include testing sections for Initial, Repair, and/or Final.

  • I want to exclude a testing section. Deselect the checkbox.  


6. Do you want to print a line between records?

  • Yes, I want to print a line to separate records. Select the Print a Line Between Records checkbox.

  • No, I want to print records as is. Deselect the Print a Line Between Records checkbox.  


7. Click Save (CTRL+S).

The report prints.

 

 

    • Related Articles

    • Assembly Test Summary

      The Assembly Test Summary report includes the Testing Results Summary and the Assembly Activity Summary. The Testing Results Summary is the number of tests that have been performed within the date range specified by the report. The tests counts are ...

    • Assembly Failed Test List/Notices

      You would print the Assembly Failed Test List/Notices when you need to identify assemblies that did not pass inspection or testing and notify customers about required corrective actions. The report helps staff track failed assemblies, monitor ...

    • How do I modify existing assembly test results?

      You would modify existing assembly test results when corrections or updates are needed after a test has been entered into the system. This may include fixing data entry errors, updating incorrect test readings, changing pass or fail statuses, ...

    • Assembly Types List

      In Caselle Backflow Management, the Assembly Types List is a report used to review the testing fields and configuration settings assigned to each backflow assembly type in your system. It helps administrators verify how different assembly types are ...

    • Assembly Types List

      You would print an Assembly Types List when you need to review the testing requirements and configuration settings assigned to each assembly type in your system. The report helps staff verify that assembly types are set up correctly for inspections, ...