How_do_I_enter_new_assembly_installations_

How do I enter new assembly installations?

Add new assemblies installations to a service address. 

You would enter a new assembly installation when a backflow prevention device has been installed at a property for the first time. Creating the installation record allows the system to track important details such as the assembly type, location, manufacturer, installation date, and testing requirements. This ensures the assembly is included in compliance monitoring, inspection scheduling, testing history, and customer records moving forward.

 

Entering new assembly installations

1. Open Connect Backflow Management > Assemblies > Enter Assembly Activity. 

2. Use the Customer box to enter a customer name or number, and then press Enter. 

3. Use the Action Code box to select Install Assembly. 

4. Enter the following information. 

Assembly ID
Enter the assembly ID. This series of characters and numbers identifies the assembly. 

Assembly model
Enter the assembly model. 

Install date
Enter the installation date (MM/DD/YYYY). 

Testing month
Select the testing month for the new assembly. 

Notification cycle
Select the notification cycle to assign to the new assembly. The notification cycle determines when notifications will be sent to the customer. 

 

5. Click Save (CTRL+S).

 

 

 

 

    • Related Articles

    • How do I copy assembly information to a new assembly?

      If you need to set up a new assembly, you can create a new assembly or you can copy the information from a saved assembly to the new assembly. The new assembly record will copy everything except for the assembly ID so can update the information that ...

    • How do I enter other assembly activity?

      Enter assembly activity for assemblies that have been removed or replaced. If the removal and installation happen at the same time, follow the instructions for replacing an assembly. Removing an assembly 1. Open Connect Backflow Management > ...

    • How do I enter assembly activity?

      Create a new record for an assembly. You would enter assembly activity when you need to record actions or events related to a backflow assembly. This can include inspections, tests, repairs, maintenance, replacements, notices, status updates, or ...

    • Assembly Models

      Use Assembly Models to set up and record the different assembly models that will be used in the Backflow Management application. Once the assembly model information is recorded in the database, it will be available to users to relate to an assembly. ...

    • Assembly Types

      An Assembly Type describes the method or design that an assembly uses for preventing contamination through backflow. Once the assembly type is recorded in the database, users can use it to set up assembly models. The information stored on the Testing ...