How_do_I_enter_other_assembly_activity_

How do I enter other assembly activity?

Enter assembly activity for assemblies that have been removed or replaced. If the removal and installation happen at the same time, follow the instructions for replacing an assembly. 

 

Removing an assembly 

1. Open Connect Backflow Management > Assemblies > Enter Assembly Activity. 

2. Use the Customer box to enter a customer name or number, and then press Enter. 

3. Use the Action Code box to select Remove Assembly. 

4. Enter the following information. 

Assembly ID
Enter the assembly ID. This series of characters and numbers identifies the assembly. 

Removal date
Enter the removal date (MM/DD/YYYY). 

5. Click Save (CTRL+S). 

 

Replacing an assembly 

1. Open Connect Backflow Management > Assemblies > Enter Assembly Activity. 

2. Use the Customer box to enter a customer name or number, and then press Enter. 

3. Use the Action Code box to select Replace Assembly. 

4. Enter the following information. 

Old assembly ID
Enter the old assembly ID. This is the assembly that is being replaced. 

Removal date
Enter the removal date (MM/DD/YYYY) for the old assembly.  

Assembly ID
Enter the new assembly ID. This series of characters and numbers identifies the assembly. 

Assembly model
Enter the new assembly model. 

Install date
Enter the installation date (MM/DD/YYYY) for the new assembly. 

Testing month
Select the testing month for the new assembly. 

Notification cycle
Select the notification cycle to assign to the new assembly. The notification cycle determines when notifications will be sent to the customer. 

 

5. Click Save (CTRL+S).

 

 

    • Related Articles

    • How do I enter assembly activity?

      Create a new record for an assembly. You would enter assembly activity when you need to record actions or events related to a backflow assembly. This can include inspections, tests, repairs, maintenance, replacements, notices, status updates, or ...

    • How do I modify assembly activity?

      You can use Modify Assembly Activity to edit a saved action for assembly activity. However, if you need to update an assembly's test results then use Modify Existing Assembly Testing Results instead. Warning! This routine modifies or deletes records. ...

    • How do I enter new assembly installations?

      Add new assemblies installations to a service address. You would enter a new assembly installation when a backflow prevention device has been installed at a property for the first time. Creating the installation record allows the system to track ...

    • Assembly Types

      An Assembly Type describes the method or design that an assembly uses for preventing contamination through backflow. Once the assembly type is recorded in the database, users can use it to set up assembly models. The information stored on the Testing ...

    • How do I search for activity by backflow assembly?

      You would search for activity by backflow assembly when you need to review the history and actions associated with a specific assembly. This can include tests, inspections, repairs, notices, status changes, or other recorded activity. Searching by ...