How_do_I_enter_initial_test_results_

How do I enter initial test results?

Record the initial test results for an assembly.

You would enter initial test results after a newly installed backflow assembly has been tested for the first time. Recording the initial test confirms that the assembly was installed correctly, is functioning properly, and meets required compliance standards before being placed into service. Entering these results also establishes the assembly’s testing history and helps begin its ongoing inspection and annual testing schedule.

Entering initial test results

1. Open Connect Backflow Management > Assemblies > Enter Assembly Test Results.

2. Enter the Assembly ID.

3. Review the Action Date, Tax Year, and Description.

4. Use the Test Results menu to select the initial test results.

5. Click to select the Initial tab.

6. Fill in the fields on the Initial Tab.

Pressing the Enter key will stop the user on the Initial tab to enter the initial test results. If there's nothing to enter, you can press Enter to move through the fields on the Initial tab or you can click on the Repair tab to enter repair information, or the Final tab to enter the final test results. Click Options (F12) to select the Stop at Initial Tab checkbox.

7. Click Save (CTRL+S).

The initial test result is recorded.

 

 

    • Related Articles

    • How do I enter repair test results?

      Record test results for repairing an assembly. Entering test results for a repaired assembly 1. Open Connect Backflow Management > Assemblies > Enter Assembly Test Results. 2. Enter the Assembly ID. 3. Review the Action Date, Tax Year, and ...

    • How do I enter final test results?

      Record the final test results for an assembly. You would enter final test results after repairs or corrective actions have been completed on a backflow assembly that previously failed testing. Recording the final test confirms that the assembly is ...

    • How do I modify existing assembly test results?

      You would modify existing assembly test results when corrections or updates are needed after a test has been entered into the system. This may include fixing data entry errors, updating incorrect test readings, changing pass or fail statuses, ...

    • Assembly Test Report

      An Assembly Test Report is a report that provides the results and details of tests performed on backflow prevention assemblies. It typically includes information such as the assembly location, assembly type, test dates, tester information, test ...

    • Which test results display in the Test Results field?

      Change the test results that display in the Test Results field. The Test Results field displays the most current or relevant testing outcome recorded for a backflow assembly. This typically includes the latest pass or fail status from the assembly’s ...