How_do_I_enter_repair_test_results_

How do I enter repair test results?

Record test results for repairing an assembly.


Entering test results for a repaired assembly

1. Open Connect Backflow Management > Assemblies > Enter Assembly Test Results.

2. Enter the Assembly ID.

3. Review the Action Date, Tax Year, and Description.

4. Use the Test Results menu to select the test results for the repaired assembly.

5. Click to select the Repair tab.

6. Fill in the fields on the Repair Tab.

Pressing the Enter key will stop the user on the Repair tab to enter the repair information. If there's nothing to enter, you can press Enter to move through the fields on the Repair tab or you can click on the Initial tab to enter initial test results, or the Final tab to enter the final test results. Click Options (F12) to select the Stop at Repair Tab checkbox.

7. Click Save (CTRL+S).

The repaired test result is recorded.

 

 

    • Related Articles

    • How do I enter final test results?

      Record the final test results for an assembly. You would enter final test results after repairs or corrective actions have been completed on a backflow assembly that previously failed testing. Recording the final test confirms that the assembly is ...

    • How do I enter initial test results?

      Record the initial test results for an assembly. You would enter initial test results after a newly installed backflow assembly has been tested for the first time. Recording the initial test confirms that the assembly was installed correctly, is ...

    • How do I modify existing assembly test results?

      You would modify existing assembly test results when corrections or updates are needed after a test has been entered into the system. This may include fixing data entry errors, updating incorrect test readings, changing pass or fail statuses, ...

    • Assembly Test Report

      An Assembly Test Report is a report that provides the results and details of tests performed on backflow prevention assemblies. It typically includes information such as the assembly location, assembly type, test dates, tester information, test ...

    • If the test result is failed, do you want to print a failed test notice?

      Set up the default setting to print a failed test notice or prompt the user to print a failed test notice when an assembly has a failed test result. If an assembly failed the test, you would print a failed test notice to notify the customer or ...